Needlepoint Belt Finishing

Belt finishing starts at $90 and goes up depending on finishing choices.

Let us take your canvas from stitched to stunning! Needlepoint.Com offers a full line of finishing services for everything you can stitch.

Call us at (919) 828-5538 to get started!

Over the past 20 years, we have developed strong relationships with the finest needlepoint finishers in the nation. We trust them with our own stitching because they pay close attention to detail and handle needlepoint with the utmost care.

Read below for information on how the belt is finished, how much you need to stitch, and what you need to provide. If you need further help, please call us at (919) 335-9420 today.

You can send your belt to us at 3811 Hillsborough Street, Raleigh, NC 27607, attn: Grace. Include a note with your name, contact information, and instructions on your finishing choices (see below).

How much should I stitch?

The finished belt size is best determined by taking a belt that is currently being worn and measuring from A (the most worn hole) to B (the top of the buckle prong).

The length of the stitched canvas when finished will be 6 inches shorter than the finished belt size. For example: a 36-inch belt will require 30 inches of stitch needlepoint.

Stitch 2 to 3 rows extra along the top and bottom edge of the design. These stitches will be rolled over to form an edge for the belt.

When finished, leather tabs are sewn at both ends of the belt to accommodate the holes and the buckle. These leather tabs will cover approximately 1.5 - 2 inches of the stitched canvas on each end of the belt. As a result, the actual design area will be approximately 3 - 4 inches shorter than the total stitched length.

Approximately 1.5 - 2 inches of stitched canvas will be covered by leather in the finishing process.

 

What are my options for finishing?

Our belt finisher provides x2 options for the belt buckle. They are silver or brass. The silver is smaller and more delicate, therefore used more often for a woman's belt. The brass is the typical choice for men's belts. If you would like a specialty buckle, you will need to provide it when you send in your finishing.

Our finisher provides x3 options of leather for finishing. Pictured below in order, they are black, light brown, and dark brown.

*Note: if none of these options work for you, please call us at (919) 335-9420 today to discuss your options.

What should I include when I bring in / ship you my belt for finishing?

When you bring in your belt for finishing, we will fill out a form with you. If you ship in your belt, please send it to 3811 Hillsborough Street, Raleigh, NC 27607, attn: Grace. You should include a note with your finished belt that has the following information:

Your name.

Your phone number and email. We will not give this out and it is purely for us to contact you with any questions / to let you know when your belt is finished.

Your address for us to ship it back.

Your buckle color choice (Silver or Brass).

Your leather color choice (black, light brown, or dark brown).

If you need us to call you upon us receiving it to discuss finishing options or questions you have. We highly recommend you send your finished needlepoint with tracking as we are not responsible for a lost package you send us.

Call us at (919) 828-5538 to get started!