The Frame Clamp by Needlework System 4. The most versatile stitching stand on the market!
Purchase the Frame Clamp and a stand, for a complete stitching system
Made to hold canvases mounted on stretcher bars or hoops (not the Q-Snap)
Clamp fully opens to 1 3/8" and accommodates the width of most bars and hoops, including Rozashi and cross-stitch
Proudly made in the USA
Weighs just 1 pound, and travels easily (remove clamp from stand before traveling)
Metal parts are made of extruded aluminum, which is strong and lightweight
Canvas jaws are made of solid acrylic, which does not damage fabric or bars
Clamp swivels horizonally 360 degrees on the stand, allowing easy access to canvas back
The Frame Clamp attaches directly to the stand, and does not require any other attachments for use
Each System 4 component is sold separately, so you can order exactly what you need
Once you choose your stand, choose your canvas holder, and your accessories
System 4 products are in stock and ship directly from our Raleigh, NC retail location
All attachments use the Tri-Knob from the stand to attach onto the stand
Travel bags sold for the stands have room to store the Frame Clamp as well
Needlework System4 products have a limited lifetime warranty, covering factory defects on all stands and metal accessories they manufacture
Shown being used with the Floor Stand, the Lap/Table Stand, and the Table Clamp Stand (each sold separately)
USER TIP - Aways be sure to fully separate the mating teeth when adjusting the angle of the accessories, or damage will occur and the teeth will not hold. Loosen the knob enough that the teeth fully separate, and be sure the teeth match before tightening.
USER TIP - Always remove the Frame Clamp when traveling with your stand.
USER TIP - When putting a Frame Clamp on a Lap Stand for the first time, it will be upside down (the teeth will be opposite). This is okay! Hold the Clamp with one hand firmly on each side and rotate upwards to the upright position. Note: this is easier to do when you have something (like a stretcher bar) in the clamps, to give you leverage.
USER TIP - If using an embroidery hoop with the Frame Clamp, it is suggested to cover the section inside the clamp with a cloth to fully protect the embroidery.
Shipping We offer shipping via USPS or UPS. Shipping will be calculated when you check out, and before you confirm your order, so you can view the shipping options. Free US shipping is available for orders that total $75 or more.
Returns We are happy to accept returns on: canvases, kits, accessories and threads. We are unable to accept returns on books, stitch guides/charts and special-order items. If you choose add-on threads for your canvas, we will accept the entire thread pack. Please request a return within 10 days of receiving your order. To be eligible for a return, your item must be unused and in its original packaging, and any online class videos must be un-viewed.
So happy I ordered my table top stand and of course the clamp! Already have a canvas loaded. Thanks for always being so prompt and quick with shipping.
a
a.v.p.
Super sturdy- Now that I have the
clamp, possibilities are endless!
A
Aaron Palmer
This clamp is the champ
The build quality is exceptional—sturdy, lightweight aluminum that holds up to long stitching sessions without any wobble or sag.
What I love most is the secure yet gentle grip it provides on my frames. The clamp is easy to adjust and reposition, allowing me to work comfortably from any angle. It is very helpful when it comes to bouncing from front to back of the canvas to ensure tails are securely tucked away/locked in.
Pairing it with the System 4 table stand was a total game-changer. My hands are free, my posture is better, and I can focus more on my work without constantly readjusting. It’s clear that this was designed by someone who understands the needs of stitchers.
Highly recommend to anyone who takes their needlework seriously. Worth every penny!
S
S. Strauss
Helpful tool!
This easy-to-use clamp is extremely helpful, especially when you need both hands to stitch! Perfect if you need to use a laying tool. Use it on the floor or table top models of the System 4 stands.
M
Maria
Love this
Got this clamp along with the lap stand it is so easy to use and I love that you can flip this over easily to get to the back of your project without taking it out of the clamp. Worth every penny!
Learning the foundation stitches, Tent, Continental and Basketweave Stitch. Learning the appropriate way to start and end threads. Chooses clearly defined designs with plenty of background and no shading. Likes to work large areas of one stitch that requires no compensation. Comfortable with using floss, pearl cotton, merino wool and/or tapestry wool.
Level 2
Expanding on foundation stitches and learning Alternating Continental, T-Stitch, Brick Stitch and its variations. Learning to read stitch diagrams that also include verbiage. Starting to learn how to compensate a stitch that cannot be completed within a defined area. Working with a mixture of single strand and pliable threads on one project to add depth and dimension. Adding stitches that build off of Tent such as Mosaic, Scotch and Cashmere.
Level 3
Learning more complicated stitches such as Rhodes, Byzantine, and Herringbone. Also adding composite stitches into repertoire such as Criss-Cross Hungarian. Reads stitch diagrams with or without numbers and verbiage. Understands compensation. Adding textured threads including man-made fibers intended for metallic, sparkly, and fluffy effects to projects and can work through shading effectively. Uses a stitch guide for projects and sticks to it. Comfortable plying and or blending threads.
Level 4
Enjoys a good stitch guide but is willing to dismiss parts in order to incorporate personal artistic interpretation. Has a library of "go to" stitches and can work through all variations of Turkey Work, Jessica Stitch, Crescent Stitch and Openwork Background stitches. Comfortable compensating in complex design areas. Ok with random stitches such as long and short stitches. Views a stitch guide as just a guide and is comfortable using stitches other than what is recommended.
Choosing a selection results in a full page refresh.
USD
25567316
231112747en
231112747en
25567316
product
https://needlepoint.com/products/frame-clamp-stretcher-bar4844239487019Needlework System 4 - Frame Clamp205.00https:files/needlework-system-4-frame-clamp-accessories-needlework-system-4-146370.jpghttps:files/needlework-system-4-frame-clamp-accessories-needlework-system-4-146370.jpgUSDInStockAccessories283652718635.Com Kits62144348203All Accessories174085668907All Products155494088747In Stock Accessories174472200235Needlework System 4280000790571Spring Gift Guide 2025286593220651Travel Essentials
The Frame Clamp by Needlework System 4. The most versatile stitching stand on the market!
Purchase the Frame Clamp and a stand, for a complete stitching system
Made to hold canvases mounted on stretcher bars or hoops (not the Q-Snap)
Clamp fully opens to 1 3/8" and accommodates the width of most bars and hoops, including Rozashi and cross-stitch
Proudly made in the USA
Weighs just 1 pound, and travels easily (remove clamp from stand before traveling)
Metal parts are made of extruded aluminum, which is strong and lightweight
Canvas jaws are made of solid acrylic, which does not damage fabric or bars
Clamp swivels horizonally 360 degrees on the stand, allowing easy access to canvas back
The Frame Clamp attaches directly to the stand, and does not require any other attachments for use
Each System 4 component is sold separately, so you can order exactly what you need
Once you choose your stand, choose your canvas holder, and your accessories
System 4 products are in stock and ship directly from our Raleigh, NC retail location
All attachments use the Tri-Knob from the stand to attach onto the stand
Travel bags sold for the stands have room to store the Frame Clamp as well
Needlework System4 products have a limited lifetime warranty, covering factory defects on all stands and metal accessories they manufacture
Shown being used with the Floor Stand, the Lap/Table Stand, and the Table Clamp Stand (each sold separately)
USER TIP - Aways be sure to fully separate the mating teeth when adjusting the angle of the accessories, or damage will occur and the teeth will not hold. Loosen the knob enough that the teeth fully separate, and be sure the teeth match before tightening.
USER TIP - Always remove the Frame Clamp when traveling with your stand.
USER TIP - When putting a Frame Clamp on a Lap Stand for the first time, it will be upside down (the teeth will be opposite). This is okay! Hold the Clamp with one hand firmly on each side and rotate upwards to the upright position. Note: this is easier to do when you have something (like a stretcher bar) in the clamps, to give you leverage.
USER TIP - If using an embroidery hoop with the Frame Clamp, it is suggested to cover the section inside the clamp with a cloth to fully protect the embroidery.
Needlework System 4AccessoriescountdownMDGG2024Needlework System 4stretcher barsadd-to-carthttps:products/needlework-system-4-frame-clamp-stretcher-bar-accessories-needlework-system-4-650156.jpghttps:products/needlework-system-4-frame-clamp-stretcher-bar-accessories-needlework-system-4-398848.jpghttps:products/needlework-system-4-frame-clamp-stretcher-bar-accessories-needlework-system-4-131909.jpg32983273013291Default Title205.00205.00https:https://needlepoint.com/products/frame-clamp-stretcher-bar?variant=32983273013291InStockDefault Title
