Needlework System 4 - Lap/Table Stand with Radius Arm
$189.00
31 reviews
Pickup In-Store
Free Shipping over $75
Earn 189Needle Points with this purchase.
The Lap/Table Stand with Radius Arm by Needlework System 4. The most versatile stitching stand on the market!
Purchase a Frame Clamp, a Scroll Frame, or Q-Snap Holder with this stand for a complete stitching system
A sturdy stand, for use on a table top or directly on your lap
Weighs just 3 pounds, and folds flat for easy storage and travel
Base is 15" x 10", Height is 8" - 12" tall (depending on your desired positioning)
Proudly made in the USA
Radius arm is included with the Lap Stand only (not included with other stands)
Made of extruded aluminum, which is strong and lightweight
Each System 4 component is sold separately, so you can order exactly what you need
Once you choose your stand, choose your canvas holder, and your accessories
System 4 products are in stock and ship directly from our Raleigh, NC retail location
Canvas holders can rotate 360 degrees, allowing access to the canvas back
All attachments use the tri-knob from the stand to attach onto the stand
A sturdy travel bag is available for this stand (sold separately)
Needlework System4 products have a limited lifetime warranty, covering factory defects on all stands and metal accessories they manufacture
Light/Accessory holder is NOT compatible with the Lap Stand (that accessory requires a 1" square post to attach to, which the Lap Stand does not have)
The Stella EDGE Clamp light is NOT compatible with the Lap Stand (that light requires at least a 1/2" horizontal square post to attach to, which the Lap Stand does not have)
Shown being used with the Frame Clamp, the Scroll Frame, and the Belt Scroll Frame (each sold separately).
USER TIP - When putting a Frame Clamp on a Lap Stand for the first time, it will be upside down (the teeth will be opposite). This is okay! Hold the Clamp with one hand firmly on each side and rotate upwards to the upright position. Note: this is easier to do when you have something (like a stretcher bar) in the Frame Clamp, to give you leverage.
USER TIP - Aways fully separate the mating teeth when adjusting /changing accessories, or damage will occur and the teeth will not hold. Loosen the knob enough that the teeth fully separate, and be sure teeth match before tightening.
USER TIP - Always remove attachments when traveling with your stand.
Shipping We offer shipping via USPS or UPS. Shipping will be calculated when you check out, and before you confirm your order, so you can view the shipping options. Free US shipping is available for orders that total $75 or more.
Returns We are happy to accept returns on: canvases, kits, accessories and threads. We are unable to accept returns on books, stitch guides/charts and special-order items. If you choose add-on threads for your canvas, we will accept the entire thread pack. Please request a return within 10 days of receiving your order. To be eligible for a return, your item must be unused and in its original packaging, and any online class videos must be un-viewed.
Absolutely worth the hype! Being able to stitch in bed or on the couch so comfortably is worth the price tag. I’ve had the floor stand for awhile thinking that would be more useful…wrong. The lap stand is superior!
S
Sharon Becker
Love this stand!
I have the floor stand version of this and love it! About to go to a retreat and wanted a system I could easily take wtih - I found it! Great product - well made! I have the frame clamp and the q-snap holder to use with this.
D
Dorothy Swanson
System 4 shipped right out!
Needlepoint Co shipped my system 4 lap device out immediately. Great service! Thank you.
H
Happy Stitcher
Thrilled with my System 4
The delivery was swift. I was so giddy opening the box. It has made all the difference in my stitching. Love these products!
V
Victoria
Perfect for Couch!
I purchased for a secondary option to my floor stand. It's perfect for sitting in the corner of the couch or stitching smaller canvases!
Learning the foundation stitches, Tent, Continental and Basketweave Stitch. Learning the appropriate way to start and end threads. Chooses clearly defined designs with plenty of background and no shading. Likes to work large areas of one stitch that requires no compensation. Comfortable with using floss, pearl cotton, merino wool and/or tapestry wool.
Level 2
Expanding on foundation stitches and learning Alternating Continental, T-Stitch, Brick Stitch and its variations. Learning to read stitch diagrams that also include verbiage. Starting to learn how to compensate a stitch that cannot be completed within a defined area. Working with a mixture of single strand and pliable threads on one project to add depth and dimension. Adding stitches that build off of Tent such as Mosaic, Scotch and Cashmere.
Level 3
Learning more complicated stitches such as Rhodes, Byzantine, and Herringbone. Also adding composite stitches into repertoire such as Criss-Cross Hungarian. Reads stitch diagrams with or without numbers and verbiage. Understands compensation. Adding textured threads including man-made fibers intended for metallic, sparkly, and fluffy effects to projects and can work through shading effectively. Uses a stitch guide for projects and sticks to it. Comfortable plying and or blending threads.
Level 4
Enjoys a good stitch guide but is willing to dismiss parts in order to incorporate personal artistic interpretation. Has a library of "go to" stitches and can work through all variations of Turkey Work, Jessica Stitch, Crescent Stitch and Openwork Background stitches. Comfortable compensating in complex design areas. Ok with random stitches such as long and short stitches. Views a stitch guide as just a guide and is comfortable using stitches other than what is recommended.
Choosing a selection results in a full page refresh.
25567316
231112747en
231112747en
25567316
product
https://needlepoint.com/products/lap-table-stand4844238733355Needlework System 4 - Lap/Table Stand with Radius Arm189.00https:products/needlework-system-4-laptable-stand-accessories-needlework-system-4-756520.pnghttps:products/needlework-system-4-laptable-stand-accessories-needlework-system-4-756520.pngUSDInStockAccessories283652718635.Com Kits62144348203All Accessories174085668907All Products155494088747In Stock Accessories174472200235Needlework System 4280000790571Spring Gift Guide 202568460904491Stitching Supplies286593220651Travel Essentials
The Lap/Table Stand with Radius Arm by Needlework System 4. The most versatile stitching stand on the market!
Purchase a Frame Clamp, a Scroll Frame, or Q-Snap Holder with this stand for a complete stitching system
A sturdy stand, for use on a table top or directly on your lap
Weighs just 3 pounds, and folds flat for easy storage and travel
Base is 15" x 10", Height is 8" - 12" tall (depending on your desired positioning)
Proudly made in the USA
Radius arm is included with the Lap Stand only (not included with other stands)
Made of extruded aluminum, which is strong and lightweight
Each System 4 component is sold separately, so you can order exactly what you need
Once you choose your stand, choose your canvas holder, and your accessories
System 4 products are in stock and ship directly from our Raleigh, NC retail location
Canvas holders can rotate 360 degrees, allowing access to the canvas back
All attachments use the tri-knob from the stand to attach onto the stand
A sturdy travel bag is available for this stand (sold separately)
Needlework System4 products have a limited lifetime warranty, covering factory defects on all stands and metal accessories they manufacture
Light/Accessory holder is NOT compatible with the Lap Stand (that accessory requires a 1" square post to attach to, which the Lap Stand does not have)
The Stella EDGE Clamp light is NOT compatible with the Lap Stand (that light requires at least a 1/2" horizontal square post to attach to, which the Lap Stand does not have)
Shown being used with the Frame Clamp, the Scroll Frame, and the Belt Scroll Frame (each sold separately).
USER TIP - When putting a Frame Clamp on a Lap Stand for the first time, it will be upside down (the teeth will be opposite). This is okay! Hold the Clamp with one hand firmly on each side and rotate upwards to the upright position. Note: this is easier to do when you have something (like a stretcher bar) in the Frame Clamp, to give you leverage.
USER TIP - Aways fully separate the mating teeth when adjusting /changing accessories, or damage will occur and the teeth will not hold. Loosen the knob enough that the teeth fully separate, and be sure teeth match before tightening.
USER TIP - Always remove attachments when traveling with your stand.
Needlework System 4AccessoriescountdownMDGG2024Needlepoint StandNeedlework System 4add-to-carthttps:products/needlework-system-4-laptable-stand-accessories-needlework-system-4-963881.jpghttps:products/needlework-system-4-laptable-stand-accessories-needlework-system-4-687636.jpghttps:products/needlework-system-4-laptable-stand-accessories-needlework-system-4-843992.jpg32983272652843Default Title189.00189.00https:https://needlepoint.com/products/lap-table-stand?variant=32983272652843InStockDefault Title
