The Light & Accessory Holder by Needlework System 4. The most versatile stitching stand on the market!
Holder provides a secure method to attach most clamp/post lights to your stand
For use with the Standard and Travel-Mate floor stands only - not compatible with Lap Stand or Table Clamp
Holder has T-shaped extension that can hold 2 separate accessories
Holder is needed to use the Scissor Tray with your floor stand
This attachment is needed to position a clamp light or magnifier over your canvas
Any clamp light or magnifier (opening at least 1-inch) will work on the Holder
Stella EDGE Clamp light can clamp to one side of this Holder (sold separately)
To attach - remove the two silver wingnuts from silver C-shaped bar. Wrap C-shaped bar around main shaft of your floor stand (ex. sideways to position holder on the back). Attach holder back onto C-shaped bar. Adjust height as needed (up or down), then tighten wingnuts. Can be positioned on any side of the floor stand
Total dimensions: 5.5" x 3". and weighs less than 9 oz.
T-Bar section dimensions: is 3" long, 1" wide, 1" deep (this is where you attach a light, the Scissor Tray, or a magnifier)
T-Bar section can be adjusted/leveled up or down with the included Tri-Knob
Holder has 2 cylinders cut into it, each with a tightening screw. One can be used for the Scissor Tray. One cylinder can be used to hold most peg-base swivel-arm lights
This accessory is also called the Light & Magnifier Holder (or Light & Tray Holder)
Proudly made in the USA
Made of extruded aluminum, which is strong and lightweight
Each System 4 component is sold separately, so you can order exactly what you need
System 4 products are in stock and ship directly from our Raleigh, NC retail location
Needlework System4 products have a limited lifetime warranty, covering factory defects on all stands and metal accessories they manufacture
Shown being used on the Floor Stand, with Scissor Tray attached, holding the Stella EDGE Clamp Light, and configured with the Frame Clamp (each sold separately).
USER TIP - Aways fully separate the mating teeth when adjusting /changing accessories, or damage will occur and the teeth will not hold. Loosen the knob enough that the teeth fully separate, and be sure teeth match before tightening.
USER TIP - Always remove attachments when traveling with your stand.
Shipping We offer shipping via USPS or UPS. Shipping will be calculated when you check out, and before you confirm your order, so you can view the shipping options. Free US shipping is available for orders that total $75 or more.
Returns We are happy to accept returns on: canvases, kits, accessories and threads. We are unable to accept returns on books, stitch guides/charts and special-order items. If you choose add-on threads for your canvas, we will accept the entire thread pack. Please request a return within 10 days of receiving your order. To be eligible for a return, your item must be unused and in its original packaging, and any online class videos must be un-viewed.
Learning the foundation stitches, Tent, Continental and Basketweave Stitch. Learning the appropriate way to start and end threads. Chooses clearly defined designs with plenty of background and no shading. Likes to work large areas of one stitch that requires no compensation. Comfortable with using floss, pearl cotton, merino wool and/or tapestry wool.
Level 2
Expanding on foundation stitches and learning Alternating Continental, T-Stitch, Brick Stitch and its variations. Learning to read stitch diagrams that also include verbiage. Starting to learn how to compensate a stitch that cannot be completed within a defined area. Working with a mixture of single strand and pliable threads on one project to add depth and dimension. Adding stitches that build off of Tent such as Mosaic, Scotch and Cashmere.
Level 3
Learning more complicated stitches such as Rhodes, Byzantine, and Herringbone. Also adding composite stitches into repertoire such as Criss-Cross Hungarian. Reads stitch diagrams with or without numbers and verbiage. Understands compensation. Adding textured threads including man-made fibers intended for metallic, sparkly, and fluffy effects to projects and can work through shading effectively. Uses a stitch guide for projects and sticks to it. Comfortable plying and or blending threads.
Level 4
Enjoys a good stitch guide but is willing to dismiss parts in order to incorporate personal artistic interpretation. Has a library of "go to" stitches and can work through all variations of Turkey Work, Jessica Stitch, Crescent Stitch and Openwork Background stitches. Comfortable compensating in complex design areas. Ok with random stitches such as long and short stitches. Views a stitch guide as just a guide and is comfortable using stitches other than what is recommended.
Choosing a selection results in a full page refresh.
USD
231112747en
25567316
product
https://needlepoint.com/products/needlework-system-4-light-magnifier-holder-for-floor-stands4877299417131Needlework System 4 - Light & Accessory Holder77.00https:files/needlework-system-4-light-accessory-holder-accessories-needlework-system-4-486541.jpghttps:files/needlework-system-4-light-accessory-holder-accessories-needlework-system-4-486541.jpgUSDInStockAccessories283652718635.Com Kits62144348203All Accessories174085668907All Products155494088747In Stock Accessories174472200235Needlework System 4280000790571Spring Gift Guide 2025
The Light & Accessory Holder by Needlework System 4. The most versatile stitching stand on the market!
Holder provides a secure method to attach most clamp/post lights to your stand
For use with the Standard and Travel-Mate floor stands only - not compatible with Lap Stand or Table Clamp
Holder has T-shaped extension that can hold 2 separate accessories
Holder is needed to use the Scissor Tray with your floor stand
This attachment is needed to position a clamp light or magnifier over your canvas
Any clamp light or magnifier (opening at least 1-inch) will work on the Holder
Stella EDGE Clamp light can clamp to one side of this Holder (sold separately)
To attach - remove the two silver wingnuts from silver C-shaped bar. Wrap C-shaped bar around main shaft of your floor stand (ex. sideways to position holder on the back). Attach holder back onto C-shaped bar. Adjust height as needed (up or down), then tighten wingnuts. Can be positioned on any side of the floor stand
Total dimensions: 5.5" x 3". and weighs less than 9 oz.
T-Bar section dimensions: is 3" long, 1" wide, 1" deep (this is where you attach a light, the Scissor Tray, or a magnifier)
T-Bar section can be adjusted/leveled up or down with the included Tri-Knob
Holder has 2 cylinders cut into it, each with a tightening screw. One can be used for the Scissor Tray. One cylinder can be used to hold most peg-base swivel-arm lights
This accessory is also called the Light & Magnifier Holder (or Light & Tray Holder)
Proudly made in the USA
Made of extruded aluminum, which is strong and lightweight
Each System 4 component is sold separately, so you can order exactly what you need
System 4 products are in stock and ship directly from our Raleigh, NC retail location
Needlework System4 products have a limited lifetime warranty, covering factory defects on all stands and metal accessories they manufacture
Shown being used on the Floor Stand, with Scissor Tray attached, holding the Stella EDGE Clamp Light, and configured with the Frame Clamp (each sold separately).
USER TIP - Aways fully separate the mating teeth when adjusting /changing accessories, or damage will occur and the teeth will not hold. Loosen the knob enough that the teeth fully separate, and be sure teeth match before tightening.
USER TIP - Always remove attachments when traveling with your stand.
Needlework System 4AccessoriescountdownMDGG2024needlepoint accessoryNeedlepoint StandNeedlework System 4add-to-carthttps:files/needlework-system-4-light-accessory-holder-accessories-needlework-system-4-507788.jpghttps:products/needlework-system-4-light-magnifier-holder-for-floor-stand-accessories-needlework-system-4-273841.jpghttps:files/needlework-system-4-light-accessory-holder-accessories-needlework-system-4-611914.jpghttps:files/needlework-system-4-light-accessory-holder-accessories-needlework-system-4-888071.jpg33093763465259Default Title77.0077.00https:https://needlepoint.com/products/needlework-system-4-light-magnifier-holder-for-floor-stands?variant=33093763465259InStockDefault Title
