The Scroll Frame by Needlework System 4. The most versatile stitching stand on the market!
Purchase a Scroll Frame and a stand, for a complete stitching system
Scroll frames are made to hold tall or large canvases, like stockings or pillows
The dowels have a stiff twill material firmly attached to the wood dowel
The canvas is secured to the dowels by tacking the edges onto the twill with thread, yarn, or velcro (on the twill and the canvas)
Three (3) sizes available - Small (S4006), Medium (S4007), and Large (S4008)
Each scroll frame comes with a specific size of dowels; dowel sizes for each are listed below
S4006 (Small) - fits dowels 12" to 20" long, and ships with 12" dowels
S4007 (Medium) - fits dowels 18" to 30" long, and ships with 18" dowels
S4008 (Large) - fits dowels 24" to 40" long, and ships with 30" dowels
(The 24" - 40" frame is not recommended for use with the Table/Lap Stand)
You can use different dowel sizes on your frame; additional dowel sets can be purchased separately here
The frame slides horizontally - out for longer dowels, and in for shorter dowels; once the dowels are attached to the frame, it stays that size
The metal side bars (that the dowels attach to) are 12" tall on all scroll frames, which is your working space
Choose your frame based on the entire width of your canvas, plus 1-2 inches (for ease)
Proudly made in the USA
Frame weighs only 4 pounds
Frame is made of extruded aluminum, which is strong and lightweight
Scroll bar swivels vertically 360 degrees on the stand, allowing easy access to canvas back
The Scroll Frame attaches directly to the stand, and does not require any other attachments for use
Each System 4 component is sold separately, so you can order exactly what you need
Once you choose your stand, choose your canvas holder, and your accessories
System 4 products are in stock and ship directly from our Raleigh, NC retail location
All attachments use the Tri-Knob from the stand to attach onto the stand
Needlework System4 products have a limited lifetime warranty, covering factory defects on all stands and metal accessories they manufacture
Shown being used with the Floor Stand and the Lap/Table Stand (each sold separately)
USER TIP - Aways be sure to fully separate the mating teeth when adjusting attachments, or damage will occur and the teeth will not hold. Loosen the knob enough that the teeth fully separate, and be sure the teeth match before tightening.
Shipping We offer shipping via USPS or UPS. Shipping will be calculated when you check out, and before you confirm your order, so you can view the shipping options. Free US shipping is available for orders that total $75 or more.
Returns We are happy to accept returns on: canvases, kits, accessories and threads. We are unable to accept returns on books, stitch guides/charts and special-order items. If you choose add-on threads for your canvas, we will accept the entire thread pack. Please request a return within 10 days of receiving your order. To be eligible for a return, your item must be unused and in its original packaging, and any online class videos must be un-viewed.
I purchased a large canvas and there was no way to really tame it. System4 is hands down the best tool for needlepoint.
D
D O
Comfortable Stitching
What a game changer! Comfortable stitching, easy reach, high quality frame. No more wrestling with a large stretcher bar assembly. I am very pleased with this frame holder.
T
Tracy
Just what i needed!
M
Mary Ann Kittinger
Floor stand
I wanted this as a way to flip the work from front to back easily and to provide scroll rods for long term projects. It works as designed. I would either buy this again with no regrets or the table stand instead. It would be great if they provided instructions to put it together because originally I had it tilted too far forward so it didn’t balance. When I reached out regarding the problem they got back to me very quickly with how to re-adjust it.
J
Jevene Caracello
Love my System 4!
I have used the system 4 for many years and love it. I decided to try a different frame size for smaller projects and I could not be happier. I highly recommend this product and any of the accessories
Learning the foundation stitches, Tent, Continental and Basketweave Stitch. Learning the appropriate way to start and end threads. Chooses clearly defined designs with plenty of background and no shading. Likes to work large areas of one stitch that requires no compensation. Comfortable with using floss, pearl cotton, merino wool and/or tapestry wool.
Level 2
Expanding on foundation stitches and learning Alternating Continental, T-Stitch, Brick Stitch and its variations. Learning to read stitch diagrams that also include verbiage. Starting to learn how to compensate a stitch that cannot be completed within a defined area. Working with a mixture of single strand and pliable threads on one project to add depth and dimension. Adding stitches that build off of Tent such as Mosaic, Scotch and Cashmere.
Level 3
Learning more complicated stitches such as Rhodes, Byzantine, and Herringbone. Also adding composite stitches into repertoire such as Criss-Cross Hungarian. Reads stitch diagrams with or without numbers and verbiage. Understands compensation. Adding textured threads including man-made fibers intended for metallic, sparkly, and fluffy effects to projects and can work through shading effectively. Uses a stitch guide for projects and sticks to it. Comfortable plying and or blending threads.
Level 4
Enjoys a good stitch guide but is willing to dismiss parts in order to incorporate personal artistic interpretation. Has a library of "go to" stitches and can work through all variations of Turkey Work, Jessica Stitch, Crescent Stitch and Openwork Background stitches. Comfortable compensating in complex design areas. Ok with random stitches such as long and short stitches. Views a stitch guide as just a guide and is comfortable using stitches other than what is recommended.
Choosing a selection results in a full page refresh.
25567316
231112747en
USD
231112747en
25567316
product
https://needlepoint.com/products/scroll-frame-holders4844237062187Needlework System 4 - Scroll Frame Holders200.00https:files/needlework-system-4-scroll-frame-holders-accessories-needlework-system-4-340695.pnghttps:files/needlework-system-4-scroll-frame-holders-accessories-needlework-system-4-340695.pngUSDInStockAccessories283652718635.Com Kits62144348203All Accessories174085668907All Products155494088747In Stock Accessories174472200235Needlework System 4280000790571Spring Gift Guide 202568460904491Stitching Supplies
The Scroll Frame by Needlework System 4. The most versatile stitching stand on the market!
Purchase a Scroll Frame and a stand, for a complete stitching system
Scroll frames are made to hold tall or large canvases, like stockings or pillows
The dowels have a stiff twill material firmly attached to the wood dowel
The canvas is secured to the dowels by tacking the edges onto the twill with thread, yarn, or velcro (on the twill and the canvas)
Three (3) sizes available - Small (S4006), Medium (S4007), and Large (S4008)
Each scroll frame comes with a specific size of dowels; dowel sizes for each are listed below
S4006 (Small) - fits dowels 12" to 20" long, and ships with 12" dowels
S4007 (Medium) - fits dowels 18" to 30" long, and ships with 18" dowels
S4008 (Large) - fits dowels 24" to 40" long, and ships with 30" dowels
(The 24" - 40" frame is not recommended for use with the Table/Lap Stand)
You can use different dowel sizes on your frame; additional dowel sets can be purchased separately here
The frame slides horizontally - out for longer dowels, and in for shorter dowels; once the dowels are attached to the frame, it stays that size
The metal side bars (that the dowels attach to) are 12" tall on all scroll frames, which is your working space
Choose your frame based on the entire width of your canvas, plus 1-2 inches (for ease)
Proudly made in the USA
Frame weighs only 4 pounds
Frame is made of extruded aluminum, which is strong and lightweight
Scroll bar swivels vertically 360 degrees on the stand, allowing easy access to canvas back
The Scroll Frame attaches directly to the stand, and does not require any other attachments for use
Each System 4 component is sold separately, so you can order exactly what you need
Once you choose your stand, choose your canvas holder, and your accessories
System 4 products are in stock and ship directly from our Raleigh, NC retail location
All attachments use the Tri-Knob from the stand to attach onto the stand
Needlework System4 products have a limited lifetime warranty, covering factory defects on all stands and metal accessories they manufacture
Shown being used with the Floor Stand and the Lap/Table Stand (each sold separately)
USER TIP - Aways be sure to fully separate the mating teeth when adjusting attachments, or damage will occur and the teeth will not hold. Loosen the knob enough that the teeth fully separate, and be sure the teeth match before tightening.
Needlework System 4AccessoriescountdownMDGG2024Needlework System 4https:products/needlework-system-4-scroll-frame-holders-accessories-needlework-system-4-219691.jpghttps:products/needlework-system-4-scroll-frame-holders-accessories-needlework-system-4-555446.jpg3298327078506712"-20" with 12" Dowels200.00200.00https:https://needlepoint.com/products/scroll-frame-holders?variant=32983270785067InStock12"-20" with 12" Dowels3298327081783518"-30" with 18" Dowels216.00216.00https:https://needlepoint.com/products/scroll-frame-holders?variant=32983270817835InStock18"-30" with 18" Dowels3298327085060324"-40" with 30" Dowels273.00273.00https:https://needlepoint.com/products/scroll-frame-holders?variant=32983270850603InStock24"-40" with 30" Dowels
