The Table Clamp Stand with Radius Arm by Needlework System 4. The most versatile stitching stand on the market!
Purchase a Frame Clamp, a Scroll Frame, or Q-Snap Holder with this stand for a complete stitching system
A sturdy stand, that will clamp to almost any table top without damaging the surface (white pads are solid acrylic)
Weighs just 1.5 pounds, the slim design stores and travels easily
Clamp opens to fit surfaces up to 4 3/4" thick, and easily accommodates table aprons up to 3 3/8" deep
Clamp is 15" x 10" x 3"; provides a range of 5.5" of project height and adjustment
Proudly made in the USA
Made of extruded aluminum, which is strong and lightweight
Each System 4 component is sold separately, so you can order exactly what you need
Once you choose your stand, choose your canvas holder, and your accessories
System 4 products are in stock and ship directly from our Raleigh, NC retail location
Canvas holders can rotate 360 degrees, to allow access to the canvas back
All attachments use the tri-knob from the stand to attach onto the stand
A sturdy travel bag (the Lap Stand bag) is available for this stand (sold separately)
Needlework System4 products have a limited lifetime warranty, covering factory defects on all stands and metal accessories they manufacture
Light & Accessory holder is NOT compatible with the Table Clamp Stand (that accessory requires a 1" square post to attach to, which the Table Clamp does not have)
The Stella EDGE Clamp light is NOT compatible with the Table Clamp Stand (that light requires at least a 1/2" horizontal square post to attach to, which the Table Clamp does not have)
Shown being used with the Belt Scroll Frame, Frame Clamp, Q-Snap Holder and Scroll Frame (each sold separately).
USER TIP - Aways fully separate the mating teeth when adjusting /changing accessories, or damage will occur and the teeth will not hold. Loosen the knob enough that the teeth fully separate, and be sure teeth match before tightening.
USER TIP - Always remove attachments when traveling with your stand.
Shipping We offer shipping via USPS or UPS. Shipping will be calculated when you check out, and before you confirm your order, so you can view the shipping options. Free US shipping is available for orders that total $75 or more.
Returns We are happy to accept returns on: canvases, kits, accessories and threads. We are unable to accept returns on books, stitch guides/charts and special-order items. If you choose add-on threads for your canvas, we will accept the entire thread pack. Please request a return within 10 days of receiving your order. To be eligible for a return, your item must be unused and in its original packaging, and any online class videos must be un-viewed.
Learning the foundation stitches, Tent, Continental and Basketweave Stitch. Learning the appropriate way to start and end threads. Chooses clearly defined designs with plenty of background and no shading. Likes to work large areas of one stitch that requires no compensation. Comfortable with using floss, pearl cotton, merino wool and/or tapestry wool.
Level 2
Expanding on foundation stitches and learning Alternating Continental, T-Stitch, Brick Stitch and its variations. Learning to read stitch diagrams that also include verbiage. Starting to learn how to compensate a stitch that cannot be completed within a defined area. Working with a mixture of single strand and pliable threads on one project to add depth and dimension. Adding stitches that build off of Tent such as Mosaic, Scotch and Cashmere.
Level 3
Learning more complicated stitches such as Rhodes, Byzantine, and Herringbone. Also adding composite stitches into repertoire such as Criss-Cross Hungarian. Reads stitch diagrams with or without numbers and verbiage. Understands compensation. Adding textured threads including man-made fibers intended for metallic, sparkly, and fluffy effects to projects and can work through shading effectively. Uses a stitch guide for projects and sticks to it. Comfortable plying and or blending threads.
Level 4
Enjoys a good stitch guide but is willing to dismiss parts in order to incorporate personal artistic interpretation. Has a library of "go to" stitches and can work through all variations of Turkey Work, Jessica Stitch, Crescent Stitch and Openwork Background stitches. Comfortable compensating in complex design areas. Ok with random stitches such as long and short stitches. Views a stitch guide as just a guide and is comfortable using stitches other than what is recommended.
Choosing a selection results in a full page refresh.
231112747en
25567316
product
https://needlepoint.com/products/table-clamp-stand4860136751147Needlework System 4 - Table Clamp Stand236.00https:products/table-clamp-stand-accessories-needlework-system-4-911207.jpghttps:products/table-clamp-stand-accessories-needlework-system-4-911207.jpgUSDInStockAccessories283652718635.Com Kits62144348203All Accessories174085668907All Products155494088747In Stock Accessories174472200235Needlework System 4280000790571Spring Gift Guide 2025
The Table Clamp Stand with Radius Arm by Needlework System 4. The most versatile stitching stand on the market!
Purchase a Frame Clamp, a Scroll Frame, or Q-Snap Holder with this stand for a complete stitching system
A sturdy stand, that will clamp to almost any table top without damaging the surface (white pads are solid acrylic)
Weighs just 1.5 pounds, the slim design stores and travels easily
Clamp opens to fit surfaces up to 4 3/4" thick, and easily accommodates table aprons up to 3 3/8" deep
Clamp is 15" x 10" x 3"; provides a range of 5.5" of project height and adjustment
Proudly made in the USA
Made of extruded aluminum, which is strong and lightweight
Each System 4 component is sold separately, so you can order exactly what you need
Once you choose your stand, choose your canvas holder, and your accessories
System 4 products are in stock and ship directly from our Raleigh, NC retail location
Canvas holders can rotate 360 degrees, to allow access to the canvas back
All attachments use the tri-knob from the stand to attach onto the stand
A sturdy travel bag (the Lap Stand bag) is available for this stand (sold separately)
Needlework System4 products have a limited lifetime warranty, covering factory defects on all stands and metal accessories they manufacture
Light & Accessory holder is NOT compatible with the Table Clamp Stand (that accessory requires a 1" square post to attach to, which the Table Clamp does not have)
The Stella EDGE Clamp light is NOT compatible with the Table Clamp Stand (that light requires at least a 1/2" horizontal square post to attach to, which the Table Clamp does not have)
Shown being used with the Belt Scroll Frame, Frame Clamp, Q-Snap Holder and Scroll Frame (each sold separately).
USER TIP - Aways fully separate the mating teeth when adjusting /changing accessories, or damage will occur and the teeth will not hold. Loosen the knob enough that the teeth fully separate, and be sure teeth match before tightening.
USER TIP - Always remove attachments when traveling with your stand.
Needlework System 4AccessoriescountdownMDGG2024needlepoint accessoryNeedlework System 4toolsadd-to-carthttps:products/needlework-system-4-table-clamp-stand-accessories-needlework-system-4-103038.jpghttps:products/needlework-system-4-table-clamp-stand-accessories-needlework-system-4-670396.jpghttps:products/needlework-system-4-table-clamp-stand-accessories-needlework-system-4-895193.jpghttps:products/needlework-system-4-table-clamp-stand-accessories-needlework-system-4-109156.jpghttps:products/needlework-system-4-table-clamp-stand-accessories-needlework-system-4-129521.jpg33043419168811Default Title236.00236.00https:https://needlepoint.com/products/table-clamp-stand?variant=33043419168811InStockDefault Title
